Deluxe Tune: Stone Grind-Ceramic Edge- Hot Wax $39.95

Base Preparation; remove old wax and foreign material

Sidewall Planing; remove sidewall material to expose the edge

Ceramic Sharpen the edges using Wintersteiger Trim Disc 71

Minor Base Repair; Using Wintersteiger Polyman P-Tex gun

Belt Grind Base and Finish

Stone Grind; Put in a base structure to local conditions

Hot Wax; Using Wintersteiger Waxjet 92

We use the Grindrite 2100 for all base and structure work

Basic Plus Tune: Belt Grind-Belt Beveled Edge & Wax: $29.95

Base Preparation; remove old wax and foreign material

Sidewall Planing; remove sidewall material to expose the edge

Belt Sharpen the edges using Grindrite ST-500

Minor Base Repair; Using Wintersteiger Polyman P-Tex gun

Belt Grind Base and Finish

Stone Grind; Put in a base structure to local conditions

Hot Wax; Using Wintersteiger Waxjet 92

We use the Grindrite 2100 for all base and structure work

Basic Tune: Belt Grind-Belt Beveled Edge & Wax: $25.00

Base Preparation; remove old wax and foreign material

Sidewall Planing; remove sidewall material to expose the edge

Belt Sharpen the edges using Grindrite ST-500

Minor Base Repair; Using Wintersteiger Polyman P-Tex gun

Belt Grind Base and Finish

Hot Wax; Using Wintersteiger Waxjet 92

We use the Grindrite 2100 for all base and structure work

Belt Grind-Belt Beveled  Edges  $20.00

Stone Grind & Wax: $20.00

Stone Grind-Ceramic Edge $25.00

Belt Sharpen & Wax: $25.00

Belt Grind: Ski $10.00 Snowboard $15.00

Ceramic Edges: $15.00 (No rust)

Hot Wax; Using Wintersteiger Waxjet 92: $8.00          

Hand Wax; Using the Wintersteiger hot iron waxer: $15:00

Sidewall Planing; remove sidewall material to expose the edge

Belt Sharpen the edges using Grindrite ST-500. $10.00

Hand sharpen to install a custom side and base bevel. $20.00

Base preparation wax removal and base cleaning. $5.00

Belt grind and finish using Grindrite 2100. $10.00

Stone Grind installation of base structure using Grindrite 2100. $16.00

Base Repair using Wintersteiger Polyman P-Tex gun. This process will thermally bond the polyethylene to the base using exact temperature control, which will ensure a perfect finish.  $8.00 and Up (cost will depend on the amount of damage to be repaired.

Shop Rate: $30.00 hr

Remove/Re-install  Snowboard Bindings $6.00